MOREC
MOREC Type 2 Switchable 6/8/10/12/16A EV Charging box IEC 62196-2 EU Standard Max 3.6KW, Schuko Plug -10m/CEE-6m
Note: The current cannot be switched during the charging process.
Fast Charging Speed
Our level 2 10/16 A 2.2/3.6 kW ev charger can charge your car faster than the other level 1. The current in the charging box can be switched freely to meet all your needs.EU Standard and Portable to Use
Schuko plugs are used with common household sockets and are compatible with GREEN UP sockets, which is 10 metres long.CEE plugs are industrial plugs and come in standard lengths of 6 metres, please check the plug before purchasing
LCD Display & LED Indicator
The small LCD display screen can show power and charging time during the charging. And the LED indicator can tell you the real-time charging status of your car.High Compatibility
Our products are CE certified and the quality is trustworthy. This EV charger is compatible with most electric cars that comply with the IEC 62196-2 standard.High Security
Our EV charger is made of high strength ABS material, which is better quality and can be used for longer. Our chargers have overcurrent protection, overvoltage protection, undervoltage protection, leakage protection, overheating protection, waterproof IP65 and other safety measures, they can safely charge your car and avoid fire.1-Year Warranty
MOREC products have a 1-year warranty. Returns and refunds are supported within 6 months, and free replacement within 12 months. （Freight insurance does NOT support warranty returns）Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: IEC62196-2 standard, suitable for cars made in Europe
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
Notice:
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
FULL-LINK TEMPERATURE MONITORING
The charger is equipped with 8 protection functions, the most prominent of which is the temperature detection function. MOREC charger can monitor the temperature of the entire link between the power plug, cable, case and car end plug, and to cut off the current within 0.2s if the temperature rises above the set value at any point. Once the temperature has dropped, the unit will reapply power.
SUPERB ADAPTABILITY
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of IEC 6296-2 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
Please check carefully if the plug matches your home socket before purchasing
TWO PLUGS
Schuko plug features two round pins of 4.8 mm diameter (19 mm long, centers 19 mm apart) for the line and neutral contacts, plus two flat contact areas on the top and bottom side of the plug for protective earth (ground).
CEE plugs are also called industrial plugs, single-phase 16A, 3-pin (2p+e) contact pins made of nickel-plated brass to ensure stable electrical conductivity.
LCD DISPLAY
Operating temperature
Charging current
Charging Voltage
Power consumption
Charging time
Charging status
Rated current of the device
Specification- PCD018-T2
Electrical Specification
Input Voltage: 230V AC
Output voltage: 230V AC
Max. output current: 16A
Max. output power: 3.6KW
Input frequency: 47~63Hz
Charging interface type: type 2 IEC 62196-2
Function and Accessory
LCD: Yes
RCD: Type A
LED Indicator light: Yes
Charging time setting: No
Working Environment
Protection degree: IP65
Environment temperature: -40℃ ~+80℃
Relative humidity: 0-95% non-condensing
Maximum altitude: <2000m
Cooling: Natural air cooling
Standby power consumpiton: <8W
FAQ
Hi，
You can install it outdoors and it is waterproof, but to extend its service life, I recommend that you install a protective cover on it to avoid rain/snow and other dangers.
Hi, you must have the neutral wire to run.
Hi ,if your BMW i3 is a typical model, using a 16A charger may take 9 hours, while using 32A may reduce the charging time by half
You just need to make sure that the power plug is grounded and matched to the one in your home, and then you can use it
You need to check your car's manual to confirm the AC charging current, and then select the corresponding current
There are no limits for charging time, if needed it will work for 12 hours.