MOREC Type 2 to SCHUKO Plug EV Portable Charger IEC 62196-2 Charging Box with Charging Time Delay Function 8/10/13/16A, 6m
Set charging time delay
The charger can set charging time delay and charging time duration. Then the charger can start charging when the electricity bill is favorable to avoid wasting too much electricity at peak hours.
Current and voltage switching
The 2-stage EV charger has 4 switchable 8/10 /13/ 16A currents. You can select the primary charging speed or secondary charging speed for your car to shorten the charging time.
By default, the last charging setting is used (only the charging current setting is retained). According to the battery status, you can select the most suitable charging current and charging time for the car. It is absolutely convenient and smart! (Note: When you replace a new plug, please check if the plug matches the charging current).
Quality and safety guarantee
CE certification, IP65 protection degree, the charger is waterproof and dustproof; There is an intelligent chip inside, which can automatically correct internal errors. Problems that can't be fixed will be displayed directly on the LED display to attract your attention.
Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: IEC62196-2 standard, suitable for cars made in Europe
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
WATERPROOF - IP66
Other brands on the market usually have a waterproof rating of IP55/IP54 ，while MOREC has chosen better materials to make it dust and water resistant to IP66, it can be used outdoors even in the rain.
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of IEC 6296-2 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
Rated current of the device
Charging duration button
Current switching button
Delay time button
Schuko plug features two round pins of 4.8 mm diameter (19 mm long, centers 19 mm apart) for the line and neutral contacts, plus two flat contact areas on the top and bottom side of the plug for protective earth (ground).
Phase Mode: Single Phase
lP Rating: IP66
Rated Current: 8/10/13/16A
Maximum Power: 3.6kW
Operating Temperature: -25℃～55℃
Enclosure Material: ABS+PC alloy
Start Mode: Button (default)
QInlet cable spec: 3* 2.5mm²
Terminal Temperature rise: <50K
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M
You can install it outdoors and it is waterproof, but to extend its service life, I recommend that you install a protective cover on it to avoid rain/snow and other dangers.
Hi, you must have the neutral wire to run.
The normal charger does not limit the current, but you can limit the receiving current of the car to 16A, otherwise you can choose the version of the APP, which can adjust the current at will
We do not recommend you to install it yourself, the charger comes with installation accessories, you need to contact an electrician for installation to ensure correct wiring.
You need to check your car's manual to confirm the AC charging current, and then select the corresponding current
Tesla is usually better suited for 3-phase devices and requires an adapter