MOREC
MOREC EV IEC 62196-2 AC-Ladestation, an der Wand montiert Lade-Wallbox mit Typ-2-Kabel, Max 7KW
LCD-Monitor
Diese Ladestation für Elektroautos ist mit einem LCD-Display ausgestattet, das während des Ladevorgangs alle Daten Ihres Autos anzeigt. Sie können Ladeinformationen wie Strom, Spannung und Temperatur sehen.
Hohe Kompatibilität
Diese Ladestation für Elektrofahrzeuge ist mit den meisten IEC 62196-2-konformen Elektrofahrzeugen kompatibel. Wird mit 6,1 m langem Typ-2-Kabel geliefert, Sie müssen das Kabel nicht separat kaufen.
Material-Upgrade
Bei Verwendung einer Aluminiumlegierung und einer PC-Legierungsplatte ist die Festigkeit höher. Knopfstartmodus, einfach zu installieren.
mehr Schutz
Diese Ladestation für Elektrofahrzeuge vom Typ 2 verfügt über Sicherheitsmaßnahmen wie Überstromschutz, Überspannungsschutz, Unterspannungsschutz, A-Typ +6mA RCD-Auslaufschutz, Überhitzungsschutz, wasserdichtes IP66 und andere Sicherheitsmaßnahmen, die Ihr Auto sicher aufladen und Feuer vermeiden können.
1 Jahr Garantie
MOREC Produkte haben 1 Jahr Garantie. Rücksendungen und Rückerstattungen werden innerhalb von 6 Monaten und kostenloser Ersatz innerhalb von 12 Monaten unterstützt. (Die Frachtversicherung unterstützt keine Garantierücksendungen)Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: IEC62196-2 standard, suitable for cars made in Europe
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
Notice:
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
WATERPROOF - IP66
Other brands on the market usually have a waterproof rating of IP55/IP54 ，while MOREC has chosen better materials to make it dust and water resistant to IP66, it can be used outdoors even in the rain.
SUPERB ADAPTABILITY
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of IEC 6296-2 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
LCD DISPLAY
Operating temperature
Charging current
Charging Voltage
Power consumption
Charging time
Charging status
Rated current of the device
PRODUCT SPECIFICATIONS
Phase Mode: Single Phase
Installation Method: Wall/Stand
Mode C ( with plug )
Certificate: CE
lP Rating: IP66
Rated Voltage:230V+10%
Frequency：50Hz±10%
Rated Current: 32A
Maximum Power: 7.68kW
Operating Temperature: -25℃～55℃
Enclosure Material: ABS+PC alloy
Start Mode: Button (default)
QInlet cable spec: 3* 6mm
Terminal Temperature rise: <50K
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M
FAQ
Hi，
You can install it outdoors and it is waterproof, but to extend its service life, I recommend that you install a protective cover on it to avoid rain/snow and other dangers.
Hi, you must have the neutral wire to run.
The normal charger does not limit the current, but you can limit the receiving current of the car to 16A, otherwise you can choose the version of the APP, which can adjust the current at will
We do not recommend you to install it yourself, the charger comes with installation accessories, you need to contact an electrician for installation to ensure correct wiring.
You need to check your car's manual to confirm the AC charging current, and then select the corresponding current
Tesla is usually better suited for 3-phase devices and requires an adapter