MOREC Type 2 Dummy Socket for IEC 62196-2 Plug Electric Vehicle Charger Charging Cable Wallbox Charging Station Plug Holder
MOREC Type 2 Dummy Socket for IEC 62196-2 Plug Electric Vehicle Charger Charging Cable Wallbox Charging Station Plug Holder
MOREC Type 2 Dummy Socket for IEC 62196-2 Plug Electric Vehicle Charger Charging Cable Wallbox Charging Station Plug Holder
MOREC Type 2 Dummy Socket for IEC 62196-2 Plug Electric Vehicle Charger Charging Cable Wallbox Charging Station Plug Holder
MOREC Type 2 Dummy Socket for IEC 62196-2 Plug Electric Vehicle Charger Charging Cable Wallbox Charging Station Plug Holder

MOREC Type 2 Dummy Socket for IEC 62196-2 Plug Electric Vehicle Charger Charging Cable Wallbox Charging Station Plug Holder

Sale price€25,00
Sold out
  • Suitable for all charging cables that conform to IEC 62196-2 Type 2.
  • The dummy socket is bent and watertight, and rainwater will not get into the plug through the gap.
  • Lock the position of the charging cable to keep the garage clean.
  • Made of high quality plastic. It's easy to clean and durable.
  • Our cable holders are specially designed for wallbox.

WATERPROOF - IP66

Other brands on the market usually have a waterproof rating of IP55/IP54 ,while MOREC has chosen better materials to make it dust and water resistant to IP66, it can be used outdoors even in the rain.

FULL-LINK TEMPERATURE MONITORING

The charger is equipped with 8 protection functions, the most prominent of which is the temperature detection function. MOREC charger can monitor the temperature of the entire link between the power plug, cable, case and car end plug, and to cut off the current within 0.2s if the temperature rises above the set value at any point. Once the temperature has dropped, the unit will reapply power.

SUPERB ADAPTABILITY

MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.


MOREC's chargers comply with 99% of IEC 6296-2 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.

LCD DISPLAY

Operating temperature
Charging current
Charging Voltage
Power consumption
Charging time
Charging status
Rated current of the device

PRODUCT SPECIFICATIONS

Phase Mode: Single Phase
Installation Method: Wall/Stand
Mode C ( with plug )
Certificate: CE
lP Rating: IP66
Rated Voltage:230V+10%
Frequency:50Hz±10%
Rated Current: 32A
Maximum Power: 7.68kW
Operating Temperature: -25℃~55℃
Enclosure Material: ABS+PC alloy
Start Mode: Button (default)
QInlet cable spec: 3* 6mm
Terminal Temperature rise: <50K
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M

FAQ

Hi,
You can install it outdoors and it is waterproof, but to extend its service life, I recommend that you install a protective cover on it to avoid rain/snow and other dangers.

Hi, you must have the neutral wire to run.

The normal charger does not limit the current, but you can limit the receiving current of the car to 16A, otherwise you can choose the version of the APP, which can adjust the current at will

We do not recommend you to install it yourself, the charger comes with installation accessories, you need to contact an electrician for installation to ensure correct wiring.

You need to check your car's manual to confirm the AC charging current, and then select the corresponding current

Tesla is usually better suited for 3-phase devices and requires an adapter