MOREC
MOREC Typ2 EV Ladegerät IEC 62196-2 Schaltbare Ladebox 16/24/32A CEE Stecker 6m
Schnellere Ladegeschwindigkeit
Die Ladegeschwindigkeit der tragbaren Ladebox mit CEE-Stecker ist schneller als die des ursprünglichen Ladegeräts vom level 1 und bietet Ihnen eine Drei-Strom-Umschaltung von 16A / 24A / 32A, die Ihre Ladeanforderungen vollständig erfüllt.
Smart-Chip
Echtzeitüberwachung von Ladestrom / Ladespannung / Temperatur. Sobald Fehler wie Überhitzung / Überspannung / Leckage auftreten, wird die Stromversorgung unterbrochen, um Unfälle zu vermeiden. Wenn Sie auf ein unlösbares Problem stoßen, wird es direkt auf dem Bildschirm angezeigt.
Produktzertifizierung
Die Schutzstufe ist IP 66, die bessere wasserdichte und staubdichte Funktionen aufweist, die CE-Zertifizierung erhalten hat, den nationalen Standards entspricht und absolut sicher und zuverlässig ist.
Hohe Kompatibilität und Portabilität
Keine Installation erforderlich, zum Aufladen einfach an die CEE-Buchse anschließen. Es ist für alle Elektrofahrzeuge geeignet, die der Norm IEC 62196-2 entsprechen.
1-Jahres-Garantie
MOREC-Produkte haben eine 1-Jahres -Garantie. Bei Problemen mit dem Produkt wenden Sie sich bitte an unser Serviceteam. Zufriedenstellende Lösungen werden versprochen.
Current difference: household electricity is alternating current (AC Power), and public fast charging stations are mostly direct current (DC Power)
Charging standard: IEC62196-2 standard, suitable for cars made in Europe
Charging current selection: You need to choose the charger according to the AC power that the car can receive. Otherwise, even if you choose a higher current, the car will not be able to receive it.
Before buying, you can check the car instruction manual or contact our customer service to get the correct model.
Notice:
1. Usually the hybrid model can only receive 16A current,
2. Tesla needs to use a separate adapter
3. The VW ID3/4 model interface is more sensitive. Since the car has an emergency mode, some cars will automatically reduce the charging current to 5A. You can try to pull out the plug on the car end by 2-3cm after connecting to get normal charging.
SUPERB ADAPTABILITY
MOREC has been specialising in EV charging for over 10 years and has accumulated a large number of charging cases and industry experience.
MOREC's chargers comply with 99% of IEC 6296-2 electric vehicle standards and can be used in a variety of different usage scenarios to provide you with the best experience.
CEE pLUG
CEE plugs are also called industrial plugs, single-phase 32A, 3-pin (2p+e) contact pins made of nickel-plated brass to ensure stable electrical conductivity.
Please note that the 32A plug is larger than the 16A industrial plug, so please check the plug carefully to avoid purchasing mistakes
LCD DISPLAY
Operating temperature
Charging current
Charging Voltage
Power consumption
Charging time
Charging status
Rated current of the device
PRODUCT SPECIFICATIONS
Phase Mode: Single Phase
Plug: CEE (bigger than normal)
Mode C ( with plug )
Certificate: CE
lP Rating: IP66
Rated Voltage:230V+10%
Frequency：50Hz±10%
Rated Current: 32A
Maximum Power: 7.68kW
Operating Temperature: -25℃～55℃
Enclosure Material: ABS+PC alloy
Start Mode: Button (default)
QInlet cable spec: 3* 6mm
Terminal Temperature rise: <50K
Service Life:>10000 times
Withstand Voltage: 2000V
Insulation Resistance: > 1000M
FAQ
Hi，
You can install it outdoors and it is waterproof, but to extend its service life, I recommend that you install a protective cover on it to avoid rain/snow and other dangers.
Hi, you must have the neutral wire to run.
The normal charger does not limit the current, but you can limit the receiving current of the car to 16A, otherwise you can choose the version of the APP, which can adjust the current at will
We do not recommend you to install it yourself, the charger comes with installation accessories, you need to contact an electrician for installation to ensure correct wiring.
You need to check your car's manual to confirm the AC charging current, and then select the corresponding current
Tesla is usually better suited for 3-phase devices and requires an adapter